How to Ensure the Efficient Operation of the Slurry Pump


Published:

Dec 24,2023

The main purpose of the slurry pump is to transport slurry, and the conveying efficiency depends on the operation effect of the slurry pump. If the slurry pump runs well, the conveying efficiency will be high, otherwise, the conveying efficiency will be mediocre.

How to Ensure the Efficient Operation of the Slurry Pump

The main purpose of the slurry pump is to transport slurry, and the conveying efficiency depends on the operation effect of the slurry pump. If the slurry pump runs well, the conveying efficiency will be high, otherwise, the conveying efficiency will be mediocre.

If the efficient operation of the slurry pump is ensured, the gap between the impeller of the slurry pump and the front guard plate should be adjusted in time, the gap between the impeller of the metal lined pump and the front guard plate should be between 0.5-1mm, and the gap between the impeller of the rubber lined pump and the front and rear sheath should be equal.

When adjusting the gap between the impeller of the slurry pump, the pump is stopped first, the bolt of the bearing assembly is loosened, the nut on the adjustment bolt is tightened, and the bearing assembly is moved forward, and the shaft is rotated by hand according to the direction of the pump until the impeller of the slurry pump rubs against the front guard. For metal-lined pumps, loosen the nut that has just been tightened in front by half a turn. Then tighten the nut on the front of the adjustment bolt to move the bearing assembly back. At this time, the gap between the impeller and the front guard plate is 0.5-1mm, for the rubber lining pump, by screwing the nut on the adjustment bolt, the bearing assembly of the slurry pump moves forward first, so that the impeller is in contact with the front sheath, and the bearing assembly moves backward, so that the impeller is in contact with the rear sheath, and the moving distance of the total slurry pump of the bearing assembly is measured, and this distance is generally used as the gap between the impeller and the front and rear sheaths, and then the position of the bearing assembly is adjusted with the adjustment bolt to ensure the correct clearance value of the impeller and the front and rear sheaths.

After adjustment, before starting again, it is necessary to re-check whether the rotation of the impeller of the slurry pump is normal, whether the bearing assembly hold-down bolt and the adjustment bolt are tightened, and then start the slurry pump.

The slurry pump operates efficiently, which can effectively improve the conveying efficiency and improve production. Start from the details, you can get big gains.

Keyword:

shanglishi,slurry pump