Instructions for Using Self-Priming Pump


Published:

Feb 26,2024

The SLZG high-efficiency self-priming pump developed by our company is the first product to fill the domestic gap. This product has multiple functions such as temperature resistance, pressure resistance, wear resistance, "one-time drainage", and "lifetime self-priming". Here's what you need to know when using it.

Instructions for Using Self-Priming Pump

The SLZG high-efficiency self-priming pump developed by our company is the first product to fill the domestic gap. This product has multiple functions such as temperature resistance, pressure resistance, wear resistance, "one-time drainage", and "lifetime self-priming". Here's what you need to know when using it.

1. Before starting the pump for the first time, connect the water inlet of the fuel tank assembly to the water supply pipeline, then open the ball valve D. After the air in the pipeline is exhausted, close the ball valve D. Make sure that the water supply pipeline is completely filled with water, and open the ball valve G. .

2. Before starting the pump for the first time, fill the pump with the transported medium and close the water injection pipeline valve. Drainage for the first time, no need to drain for subsequent use.

3. Before starting, you must check whether the main shaft of the water pump is flexible. Use jog mode to check whether the running direction is consistent with the steering mark. The steering direction is clockwise when viewed from the direction of the motor.

4. The weight of the inlet and outlet pipelines cannot be supported on the inlet and outlet flanges of the water pump. They should be fixed on the bracket (the bracket must be prepared by the user). All parts of the pipeline connection must be tight and air-tight, otherwise the self-priming function and flow lift will be affected.

Keyword:

Self-Priming Pump