Disassembly and Assembly of Corrosion-Resistant and Wear-Resistant Mortar Pump


Published:

Jan 02,2024

As an important construction machinery and equipment, the mortar pump is widely used in the fields of building construction and engineering construction. It plays an important role in transporting mortar, cement slurry and other materials. Therefore, the disassembly and assembly process of the mortar pump is particularly important. This article will introduce in detail the disassembly and assembly of corrosion-resistant and wear-resistant mortar pumps, including disassembly and assembly steps, precautions, and operating techniques.

Disassembly and Assembly of Corrosion-Resistant and Wear-Resistant Mortar Pump

As an important construction machinery and equipment, the mortar pump is widely used in the fields of building construction and engineering construction. It plays an important role in transporting mortar, cement slurry and other materials. Therefore, the disassembly and assembly process of the mortar pump is particularly important. This article will introduce in detail the disassembly and assembly of corrosion-resistant and wear-resistant mortar pumps, including disassembly and assembly steps, precautions, and operating techniques.

Step 1: Preparation

Before starting to disassemble and assemble the mortar pump, some preparations need to be done first. This includes confirming the safety of the work site, checking whether the tools and equipment used are intact, and ensuring that the parts and accessories required for the disassembly and assembly process are complete and in good condition.

Step 2: Turn off the power to the pump

Before disassembling or assembling the mortar pump, its power supply must be cut off. This can effectively prevent accidents and ensure the personal safety of operators.

Step 3: Pump body disassembly

First, disassemble the mortar pump body. The specific steps are as follows:

a. Remove the parts and accessories fixed to the pump body one by one.

b. Use appropriate tools to loosen and remove the bolts or fasteners connecting the pump body and delivery pipe.

c. Slowly remove the pump body to ensure smooth operation and avoid damage to other components or equipment.

Remove the discharge valve installed on the mortar pump. The specific steps to remove the drain valve are as follows:

a. Follow the drain valve operating instructions and gradually close and remove the piping and connections from the drain valve.

b. Use appropriate tools to remove the drain valve, ensuring smooth operation and no damage to other parts.

Step 5: Disassembly of pump sleeve

Disassemble the pump sleeve of the mortar pump. The steps are as follows:

a. First undo the bolts or fasteners connecting the pump casing and the pipe.

b. Slowly remove the pump sleeve according to the operating instructions, paying attention to smooth operation to avoid damaging other parts.

Step Six: Detailed Inspection

Before assembling the mortar pump, it is necessary to conduct a detailed inspection of the disassembled parts. Including checking the degree of wear, cracks and corrosion of parts and components. If defective parts are found, they need to be repaired or replaced in time.

Step 7: Assemble the mortar pump

After detailed inspection of each component of the mortar pump and confirmation that there are no problems, you can start assembling the mortar pump. The specific steps are as follows:

a. Assemble step by step in reverse order to ensure the correct installation position of each component.

b. Use the corresponding tools and fasteners to install the parts and accessories to the corresponding positions one by one.

c. During assembly, pay attention to the strength and sequence of tightening bolts or fasteners to avoid unnecessary damage or collapse.

Step 8: Testing and trial operation

After completing the assembly of the mortar pump, comprehensive testing and commissioning are required. Including checking the tightness, connectivity and lubrication of each component. At the same time, a period of trial operation can be carried out to ensure the normal operation and performance of the mortar pump.

Keyword:

Corrosion-Resistant and Wear-Resistant Mortar Pump