-
ABOUTThe group company integrates design, casting, production, research and development, sales and service to provide customers with modern, digital one-stop water supply system solutions.
-
PRODUCTS
-
APPLICATION4 production bases in group company, 10 branches, more than 20 offices, more than 1000 professional employees, long-term service to domestic and foreign high-end customer groups including Five state-owned power groups.
-
NEWSShanglishi Group is the main member appointed by the Pump Association to participate in the development of national standards for slurry pumps and petrochemical centrifugal pumps.
-
CONTACTThe company's good product quality and service have always created value for customers, and are favored by more and more customers.
The Slurry Pump is Being Assembled
Published:
Feb 01,2024
Slurry pump is an important industrial pump, which is widely used in the production and transportation processes of mining, electric power, metallurgy, chemical industry and other industries. During the assembly process, we need to follow certain steps and requirements to ensure the performance and safety of the slurry pump.
Slurry pump is an important industrial pump, which is widely used in the production and transportation processes of mining, electric power, metallurgy, chemical industry and other industries. During the assembly process, we need to follow certain steps and requirements to ensure the performance and safety of the slurry pump.
First, we need to prepare the required parts and tools. Including pump body, impeller, bearings, seals, screws, nuts, wrenches, etc. Before assembly, we need to inspect each component to ensure that its quality and specifications meet the requirements. Next, we need to assemble the pump body. Align all parts of the pump body to ensure that the fitting clearance between the parts meets the requirements. At the same time, we need to clean up the debris and moisture inside the pump body to avoid affecting the performance and life of the pump.
Then we need to install the impeller. Install the impeller on the pump body, making sure it is in the correct position and secure it with screws and nuts. At the same time, we need to check the gap between the impeller and the pump body to ensure that it meets the requirements. Next, we need to install the bearings. Install the bearing on the bearing seat of the pump body and use appropriate tools to fix and adjust. At the same time, we need to check the clearance and lubrication of the bearing to ensure that it performs well. Finally, we need to install the seal. Install the seal at the inlet and outlet of the pump body and ensure that it is in the correct position to prevent slurry leakage. At the same time, we need to check whether the inlet and outlet flanges of the pump body are flat to avoid affecting the performance and life of the pump.
During the assembly process, we need to pay attention to some details. For example, the tightening degree of screws and nuts should be moderate and not too tight or too loose; the clearance of bearings should be adjusted to the best state; the installation of seals should be correct, etc. These details will affect the performance and life of the slurry pump. In short, the assembly of the slurry pump is an important task and needs to be carried out according to certain steps and requirements. Only through careful assembly can the performance and safety of the slurry pump be ensured, providing reliable protection for industrial production and transportation processes.
Keyword:
SLURRY PUMP
Recommended
Jul 15,2024
SHANGLISHI PUMP GROUP
Department Director: Ms. Wang
Tel: +86-311-82725800/82725629
Email: admin@sls-pump.com
WhatsApp: +86-15830676372
Mobile Website
Mobile Website
Copyright © 2022 SHANGLISHI PUMP GROUP